We manufacture aarons custom size kitchen cabinet doors and drawer fronts. Shipping anywhere in Can / US  

Pricing Payment About Us Contact Us Guarantee Tracking Number Handles Knobs Slides Hinges BLUM HINGES Veneer Shipping Delivery  Quote Page Raised Panel Doors Flat Panel Doors Frame Doors Shaker Doors Raised Panel Drawer Fronts Flat Panel Drawer Fronts Slab Drawer Fronts Panel Raisers Edges Hinges BLUM HINGES Slides Knobs

Alfit Slides

Attach this "clip on" bracket to your drawer front with screws, not included.	Your prepared front can now be "clipped" to your drawer box as shown.	The 2 screws shown above on the left are used for adjusting the front.	If you ever need to remove the drawer front from the sides, turn this screw in the direction shown on the bracket.	Finish your job by installing the cover caps.

Cut bottom and back 31mm (1 1/4") less then the drawer opening.  This system is very fast and can be done by amateur woodworkers and most home owners.  If you cut the bottom too big, of course your box will be tight in the cabinet, if this were a dovetailed or plain old wooden drawer box you will be in trouble.  With this system, just take it apart and re-cut the bottom/back to fit.  Re-screw it back together in same holes and try again. ( screws not included ).... This is quite handy in a re-face job where everything is not square.  The drawer side is one part of the slide and another piece fastens to the cabinet so no need for extra slides.

Your finished job should look like this.

 

If you have any questions, or if you find any broken links please contact our Webmaster

Copyright 2000 Randy Howse Custom Doors. All rights reserved.