Blum european hinges description of use and using.

INSTALLING HINGE TO PLATE & HINGE TO DOOR
This is full size European hinge, (inserta)

	If we drill for you, this is what you will get. This is drilled to a BLUM PATTERN. All hinges we sell will fit this pattern. Many, but not all manufactures hinges will fit this. This is a 35mm and two 8mm holes. We drill this pattern ONLY, all 3 holes.
	To "Clip" the Hinge to the Plate, hold as shown and rock hinge forward on plate.
	Pinch Hinge and Plate together near end to "Clip" them together. Can be removed with the small lever on end of hinge, more on this later. ( Can be tricky to do when hinge and plate are not fastened to your cabinets)
	INSERTA HINGES This is where this Hinge pulls ahead of others. Have the top of Hinge opened as shown and drop in holes, all the way to bottom.
	With thumb pressure, or thumbs in some cases, rock the top of the Hinge in direction shown until it snaps in place. The first BIG DEAL on this Hinge.
	Look at that FINISHED hinge installed on the door. Unless you worked with the other types of hinges you might not appreciate this easy method of installing a Hinge to a door. But believe me, we would give up sliced bread before this Hinge. Many cabinet shops use these as they can transport their doors separate from the boxes and very easily re-install when on site. Also removal for finishing is very fast ( see later ) as we do fit all doors before staining and top coating right?